%CORRELATOR_REPORT_FORMAT 3

+HEADER

SESSION      CRF150
VGOSDB       20250820-crf150
START        2025-232-1800
END          2025-233-1800
CORRELATOR   SHAO
ANALYST      Tianyu Jiang, Hexuan
VERSION      1-1

+SUMMARY

qcode     total  correlated
---------------------------
5-9       87.20%     91.99%
0          7.53%      7.95%
1-4,A-H,N  5.27%      0.06%
removed    0.00%      0.00%

* qcode       quality codes, error codes, or status
* total       percent of total scans
* correlated  percent of correlated scans

+STATIONS

station name     mk4
--------------------
Bd      BADARY   d
Hh      HARTRAO  r
Ho      HOBART26 t
Zc      ZELENCHK z

* station  2-char station ID
* name     3- to 8-char station name
* mk4      1-char HOPS station code

+NOTES

station  note
----------------------------------------------------------------
Bd      Intensive (06:44-08:00) 

Hh      Two short outages
 
Ho      No fringe amplitude in channels S00UR, S01UR, S02UR, S03UR
Ho      Removed channel from fringe fitting: S00UR, S01UR, S02UR, S03UR
Ho      Applied manual phase calibration
Ho      No fmout-gps information in the log file

Km      Did not observe

Ur      Did not observe

Zc      Intensive (06:53-08:00)

* station  2-char station ID, baseline, closure set, or - for general notes
* note     correlator notes and feedback

+CLOCK

st epoch           used-offset     used-rate  raw-offset    raw-rate    comment
--------------------------------------------------------------------------------
Bd 2025-232-1800    216.745    -1.850000e-13    -0.577   -3.000000e-15
Hh 2025-232-1800      3.104    -6.220000e-13     2.261    1.120000e-13
Ho 2025-232-1800     28.719     6.000000e-15      -        -            no fmout-gps
Zc 2025-232-1800    214.994    -3.470000e-13    -1.646   -3.470000e-13  reference

* st           2-char station ID
* epoch        time coordinate of offsets and clock model segment start time
* used-offset  (usec) station clock minus offset used in correlation at epoch
* used-rate    drift rate of station clock minus offset used in correlation
* raw-offset   (usec) station clock minus reference clock offset at epoch
* raw-rate     drift rate of station clock minus reference clock offset
* comment      clock-break, reference station, or other notes

+CHANNELS

channel id frequency
--------------------
S00UR   a   2200.99
S01UR   b   2216.99
S02UR   c   2232.99
S03UR   d   2256.99
S04UR   e   2272.99
S05UR   f   2288.99
X06LR   g-  8213.99
X06UR   g+  8213.99
X07UR   h   8253.99
X08UR   i   8353.99
X09UR   j   8513.99
X10UR   k   8733.99
X11UR   l   8853.99
X12UR   m   8873.99
X13LR   n-  8933.99
X13UR   n+  8933.99

* channel    HOPS channel name
* id         short name with sideband indicator
* frequency  (MHz) sky frequency

+DROP_CHANNELS

Ho      S00UR, S01UR, S02UR, S03UR

+MANUAL_PCAL

Ho

+QCODES

bl:band    0  1  2  3  4   5   6    7    8    9   N  -  total
-------------------------------------------------------------
dr:S      14  0  0  0  0   0   0    1   19  126   9  0    169
dr:X       4  0  0  0  0   1   0    3   17  135   9  0    169
dt:S      12  0  0  0  0   0   0    1   28   59   6  0    106
dt:X       5  0  0  0  0   0   0    3   27   65   6  0    106
dz:S       0  0  0  0  0   2   4   18  112   38  12  0    186
dz:X       5  0  0  0  0   8   8   20   54   79  12  0    186
rt:S      21  0  0  0  0   0   1   16   45   16   1  0    100
rt:X       5  0  0  0  0   0   1    1   18   74   1  0    100
rz:S      25  0  0  0  0   1   2   19   77   59  10  0    193
rz:X       5  0  0  0  1   5   9   16   48   99  10  0    193
tz:S      29  0  0  0  0   0   0    0    7   66   7  0    109
tz:X       5  0  0  0  0   1   2   14   31   49   7  0    109
total    130  0  0  0  1  18  27  112  483  865  90  0   1726

* bl:band  baseline and frequency band name
* 0        no fringe detected
* 1-9      fringe detected, higher value means better quality
* B        fourfit interpolation error
* D        no data in one or more frequency channels
* E        fringe found at edge of SBD, MBD, or rate window
* F        fork problem in processing
* G        channel amplitude diverges too far from mean amplitude
* H        low phase-cal amplitude in one or more channels
* N        correlation or fringing failed
* -        correlation not attempted
* total    column and row totals

+SNR_RATIOS

bl     X  n_X     S  n_S
------------------------
dr  0.95  156  1.09  146
dt  0.62   95  0.84   88
dg  0.00    0  0.00    0
ds  0.00    0  0.00    0
du  0.00    0  0.00    0
dz  0.98  168  1.26  174
rt  0.65   94  0.63   78
rg  0.00    0  0.00    0
rs  0.00    0  0.00    0
ru  0.00    0  0.00    0
rz  0.90  178  0.65  157
tg  0.00    0  0.00    0
ts  0.00    0  0.00    0
tu  0.00    0  0.00    0
tz  0.60   96  0.55   72
gs  0.00    0  0.00    0
gu  0.00    0  0.00    0
gz  0.00    0  0.00    0
su  0.00    0  0.00    0
sz  0.00    0  0.00    0
uz  0.00    0  0.00    0

* bl       baseline
* [A-Z]    ratio for this band name
* n_[A-Z]  number of scans in average for this band name

+EOP

  mjd  tai-utc     ut1-utc     xpole     ypole
----------------------------------------------
60905       37    0.074526  0.222240  0.407568
60906       37    0.075625  0.223274  0.406051
60907       37    0.076761  0.224518  0.404464
60908       37    0.077768  0.225838  0.403098
60909       37    0.078622  0.226885  0.401821

* mjd      integer modified Julian date
* tai-utc  (sec) TAI minus UTC offset
* ut1-utc  (sec) UT1 minus UTC offset
* xpole    X pole EOP parameter
* ypole    Y pole EOP parameter

+CORRELATION

SOFTWARE    DiFX
VERSION     2.5.5-r10834
ALGORITHM   FX
NCHAN       64
FFTSPECRES  
SPECRES     
TINT        1.28

+FRINGING

SOFTWARE    HOPS
VERSION     3.24-3753

+VGOSDB

SOFTWARE    nuSolve
VERSION     0.8.2

+CORRELATION_CONFIG_FILE

vex=crf150.vex
antennas = Bd,Hh,Ho,Zc
singleScan = TRUE
singleSetup = TRUE
jobSeries = crf150
startSeries = 1
tweakIntTime = true
ANTENNA Bd
{
filelist = filelist.bd
phaseCalInt = 1
toneSelection = most
}
ANTENNA Hh
{
filelist = filelist.hh
phaseCalInt = 1
toneSelection = most
}
ANTENNA Ho
{
filelist = filelist.ho
phaseCalInt = 1
toneSelection = most
}
ANTENNA Km
{
phaseCalInt = 1
toneSelection = most
}
ANTENNA Sv
{
phaseCalInt = 1
toneSelection = most
}
ANTENNA Ur
{
phaseCalInt = 1
toneSelection = most
}
ANTENNA Zc
{
filelist = filelist.zc
phaseCalInt = 1
toneSelection = most
}
SETUP calibrator
{
  tInt = 1.28
  nChan = 64
}
RULE rule1
{
  setup  = calibrator
}

+FRINGING_CONFIG_FILE
    
   sb_win -2.0 2.0 mb_win -2.0 2.0 dr_win -30.0e-5 30.0e-5
   pc_mode multitone
   pc_period 999
 
   weak_channel 0.1
   pc_amp_hcode 0.0002

  if f_group X
     ref_freq 8213.99
  if f_group S
     ref_freq 2200.99

  if station t
     lsb_offset -180.0 
  if station r
     lsb_offset -180.0 
 
  if station t and f_group S
     freqs e f 
 
  if station t and f_group S
     pc_mode manual
     pc_phases ef  -177.7  -278.6
  if station t and f_group X
     pc_mode manual
     pc_phases ghijklmn  -112.0  -211.8  -262.7  -276.8  -13.8  -175.3  -325.5  -92.6 

  if station r and f_group S
     pc_phases abcdef  5.7   -1.6   -2.4  -10.7    4.4    4.4
  if station r and f_group X
     pc_phases ghijklmn  -5.2    7.8    5.5   -3.7    0.2   -1.6   -0.4    1.1
  if station z and f_group S
     pc_phases abcdef  -2.6   -0.7    4.6    3.2  -12.4    5.4
  if station z and f_group X
     pc_phases ghijklmn   -3.0    5.1    3.3   -0.5   -5.9    2.2    2.5    0.1

+END
