==================================== aum010 ====================================

Hb : Communication to antenna failed (03:56-04:09).

Ke : SAR (20:43-20:50).

Yg : Wind stowed (23:30-23:39).

================================ aum010hb WIKI =================================

2018-09-25 13:03:00 <auscope-observers@list.utas.edu.au> aum010 Hobart 12m

Disk VSN: Flexbuffhb | Data volume at beginning: N/A 
Schedule drudged and processed using snp2flexbuff.sh. Schedule has been edited to include the SAR scan at 19:18:08. Scans 267-1916 and 267-1919 have been skipped. (JMc) 

To set up the DBBCs/recorders, please use “aum007.setup.py” but do not run this until after mv022 completes! 
The reason is that both experiments are using the DBBCHO and flexbuff for the recording. 

230149 - DBBCHO restarted with correct v105E_2 software. (JMc) 

~0400 Network to the antenna failed. Fixed by power cycling media adaptor, then rebooting antenna controller. (JMc)

================================ aum010ke WIKI =================================

2018-09-25 13:03:00 <auscope-observers@list.utas.edu.au> aum010 Katherine 12m

Disk VSN: HOB+0120/32000 | Data volume at beginning: 22862.928 GB (9138) 
Experiment started OK (Prad).

================================ aum010yg WIKI =================================

2018-09-25 13:03:00 <auscope-observers@list.utas.edu.au> aum010 Yarragadee 12m

Disk VSN: HOB+0123/32000 | Data volume at beginning:  30686.115 GB (1314) 
Experiment started okay (JMc). 

23:30 - 2339. Windstows at Yarragadee, but due to malfunctioning anemometer. windyg has been powered off to clear the bogus windstow, (JMc)
================================================================================