Starting generation of Calibration File 
FS version = 0009.0011.0006 
time_zero = 2480400 
Found #330 errors of type = ERROR st   -7 Antenna off-source! 
Found #58 errors of type = ERROR ST -259 RX link is down. 
Found #1 errors of type = ERROR ch -304 vc TPI selection does not check with requested setting 
Found #1 errors of type = ERROR ch -305 vc USB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch -309 vc alarm is on 
Found #1 errors of type = ERROR ch -307 vc unlock indicator is on 
Found #1 errors of type = ERROR bo -133 Error opening procedure library 
Found #1 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #1 errors of type = ERROR ch -306 vc LSB attenuator does not check with requested setting 
Found #1 errors of type = ERROR ch   -4 Device vc timed-out on response from MATCN 
Found #1 errors of type = ERROR ch -302 vc frequency does not check with requested value 
Found #1 errors of type = ERROR ch -303 vc bandwidth does not check with requested value 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found these BBCs: vc01 vc05 vc09
NBBC: 3
Found these  parameters:   
RX1 min= 100000 max= -1
RX2 min= 100000 max= -1
RX3 min= 100000 max= -1
Plotting 3 Tsys channels: 01 05 09
NTSYS: 3
in match_chan ft1=  nt1=  st1=  tt= 
set scale tsys1 [2] min max  
set scale tsys2 [2] min max  
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin -5 ymax 5