Starting generation of Calibration File 
FS version = 0009.0004.0018 
time_zero = 25635600 
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Rack type is MK3/4
Found #9 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #8 errors of type = ERROR ch -351 Tape head 1 is not in requested position. 
Found #7 errors of type = ERROR ST   -4 Error in antenna communication 
Found #5 errors of type = ERROR ch -332 Tape drive is not in remote 
Found #5 errors of type = ERROR ch -338 Reproduce equalizer does not check with request 
Found #5 errors of type = ERROR ch -341 Reproduce track B does not check with request 
Found #4 errors of type = ERROR ch -339 Bypass mode does not check with requested setting 
Found #3 errors of type = ERROR ch -346 Record enable is in the wrong state. 
Found #2 errors of type = ERROR ch -334 Tape should be moving and it's stopped 
Found #2 errors of type = ERROR ch -342 Tape is not in ready state (vacuum not ready) 
Found #2 errors of type = ERROR ch -349 The Receiver 70K stage is hotter than  70K. 
Found #1 errors of type = ERROR qg -303 Track  5 parity errors exceed threshold. 
Found #1 errors of type = ERROR qk -211 Tsys value for device vc overflowed or were less than zero. 
Found #1 errors of type = ERROR ch -352 Tape head 2 is not in requested position. 
Found #1 errors of type = ERROR bo -133 Error opening procedure library 
Found #1 errors of type = ERROR qg -303 Track  7 parity errors exceed threshold. 
Found #1 errors of type = ERROR q< -301 Vacuum is not ready. 
Found #1 errors of type = ERROR qa -201 Tape number must be 8 charaters. 
Found #1 errors of type = ERROR qg -303 Track 11 parity errors exceed threshold. 
Found #1 errors of type = ERROR qg -303 Track  9 parity errors exceed threshold. 
Found these BBCs: vc02 vc06 vc11
NBBC: 3
Found these RX parameters: 02(LO) 03(DCAL) 0E(LO5MHZ)
RX1 min= 34.73 max= 2001.296.17:44:04.98
RX2 min= 46.82 max= 47.19
RX3 min= 2.080 max= 2.092
Plotting 3 Tsys channels: 02 06 11
Tsys1 values are: 1 2 etc
Tsys2 values are: 9 10 etc
Tsys3 values are:   etc
NTSYS: 3
in match_chan ft1= na443wz.log.tsy1.ntup nt1= 8 st1= v2 tt= 1
set scale tsys1 [2] min max 38.0 109.3
set scale tsys2 [2] min max 27.7 103.4
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 33.9 ymax 103.3 
in match_chan ft1= na443wz.log.tsy1.ntup nt1= 12 st1= v6 tt= 1
set scale tsys1 [2] min max 38.0 109.3
set scale tsys2 [2] min max 27.7 103.4
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 29.4 ymax 98.9 
in match_chan ft1= na443wz.log.tsy2.ntup nt1= 9 st1= v11 tt= 2
set scale tsys1 [2] min max 38.0 109.3
set scale tsys2 [2] min max 27.7 103.4
set scale tsys3 [2] min max  
set scale tsys4 [2] min max  
 Tsys scale ymin 22.7 ymax 108.4