Starting generation of Calibration File 
FS version = 0009.0004.0006 
time_zero = 3934800 
Rack type is VLBA
Rack type is VLBA
Found #6 errors of type = ERROR an -103 Pointing computer tracking errors are too large. 
Found #6 errors of type = ERROR qo -301 WARNING: ONSOURCE status is SLEWING! 
Found #5 errors of type = ERROR qk -211 Tsys value for device ia overflowed or were less than zero. 
Found #4 errors of type = ERROR ch -208 b5 gain mode does not check with requested setting 
Found #2 errors of type = ERROR qg -303 Track 29 parity errors exceed threshold. 
Found #1 errors of type = ERROR st   -1 Antenna got the wrong angles 
Found #1 errors of type = ERROR st   -3 Commanding angles okay now. 
Found #1 errors of type = ERROR qk -211 Tsys value for device bu overflowed or were less than zero. 
Found #1 errors of type = ERROR qk -211 Tsys value for device ib overflowed or were less than zero. 
Found #1 errors of type = ERROR sp   -4 Unrecognized name (not a function or procedure). 
Found #1 errors of type = ERROR mc   -2 Interface b5 responded  but did not ACKnowledge. 
Found these BBCs: bbc02 bbc06 bbc11
NBBC: 3
Found these RX parameters: 00(front) 02(lo) 03(dcal)
RX1 min= 22.65 max= 29.36
RX2 min= 47.43 max= 47.68
RX3 min= 47.68 max= 48.53
Plotting 3 Tsys channels: 02 06 11
Tsysa values are: 1 2 3 etc
Tsysb values are: 9 10 11 etc
Tsysc values are:    etc
Tsysd values are:    etc
NTSYS: 3
in match_chan ft1= is147gc.log.tsy1.ntup nt1= 7 st1= 2u tt= 1
set scale tsys1 [2] min max 58.8 58.8
set scale tsys2 [2] min max 42.9 42.9
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100 
in match_chan ft1= is147gc.log.tsy1.ntup nt1= 11 st1= 6u tt= 1
set scale tsys1 [2] min max 58.8 58.8
set scale tsys2 [2] min max 42.9 42.9
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100 
in match_chan ft1= is147gc.log.tsy2.ntup nt1= 8 st1= 11u tt= 2
set scale tsys1 [2] min max 58.8 58.8
set scale tsys2 [2] min max 42.9 42.9
set scale tsys3 [2] min max  
 Tsys scale ymin 0 ymax 100